GENUINE CANISTER FILTER REPLACEMENT

INLET & OUTLET SPRAY BAR PIPE ASSEMBLY

Biopro Canister Filter Replacement Inlet & Outlet Pipe Assembly – Suits Worx, Hopar, Bioscape and Any 19 mm

Replace both return and intake on your canister with this Biopro inlet & outlet pipe assembly—compatible with Worx, Hopar, Bioscape and any filter using 19 mm hoses for a fast, leak‑free refresh.

Key features

• Broad compatibility: Fits Biopro, Worx, Hopar, Bioscape and most canisters that use 19 mm (3/4") hose.
• Complete pipe refresh: Includes both inlet and outlet assemblies for a matched, reliable setup.
• Leak‑resistant connections: Proper barbs and collars give a secure seal on 19 mm hose; ideal with stainless clamps.
• Optimised flow: Outlet suits spray bar or directional nozzle; inlet strainer protects livestock and media.

What’s included

• Inlet U‑pipe or elbow (19 mm)
• Inlet strainer and suction cup mounts
• Outlet U‑pipe or elbow (19 mm)
• Spray bar sections and end cap or directional nozzle
• Suction cups and clips for glass mounting

Compatibility notes

• Hose I.D. must be 19 mm; if your setup is 16/22 mm or 12/16 mm, use the appropriate adapters.
• Check cabinet height and rim clearance for rigid U‑pipes; elbows are lower‑profile if space is tight.
• Suits both UV and non‑UV canister variants as long as the return/intake hose size is 19 mm.

Installation tips

• Soften hose ends in hot water for 30–60 seconds, then push fully over barbs for a tight seal.
• Use two clamps per barb for marine or high‑head installations; avoid overtightening on plastic.
• Angle the spray bar to break surface film without splashing; aim inlet opposite the outlet to minimise dead spots.

100 % GENUINE REPLACEMENT PARTS